Wednesday, June 12, 2013
Canon BJC 2100 waste ink tank full
Waste Error Reset
1: Remove the Cartridge
2: Unplug the AC Power Cord
3: Open Front access panel
3: Hold down the RESUME/RESET button and plug in the AC power cord
4: Release RESUME/RESET after plugging in the AC Power cord.
5: Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET .
6: Press and HOLD RESUME/RESET for two seconds or more and release it.
7: Press and HOLD RESUME/RESET for two seconds or more and release it.
8: Unplug AC Power Cord to set data
If it does not work. Try some more times. Thanks every one above.
Monday, June 10, 2013
Canon iP1500 Resetter
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green
6. Release both buttons
resetter Canon IP1500 : Download
Driver Canon PIXMA IP1500 Download
Manual Reset_iP1500.pdf
Friday, June 7, 2013
ERROR CODE AND RESET CANON MP150 MP160
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
Wednesday, June 5, 2013
reset waste ink canon iP4000
1. With the printer plugged in and powered off, press and hold the
Resume/Cancel button, then press and hold the Power button.
Do not release the buttons. The LED light should be green to
indicate that a function is selectable
2. While holding the Power button, release the Resume/Cancel button,
do not release the Power button
3. While holding the Power button, press the Resume/Cancel button 2 times,
and then release both the Power and Resume/Cancel buttons. Each time the
Resume/Cancel button is pressed, the LED lights alternately in orange and
green, starting with orange.
4. When the LED light is green, press the Resume/Cancel button 4 times. Each
time the Resume/Cancel button is pressed, the LED lights alternately in
orange and green, starting with orange.
5. Press the Power button. The LED lights in green, and the reset is performed.
When the operation completes, the printer returns to the menu selection
mode automatically
6. Press the power button to exit service mode.
Sunday, June 2, 2013
Restore Canon iP6210D iP6220D MP150 MP170 MP450 iP2200 iP1600
Download program
After download dont forget your comment in guest book. thanks
Friday, May 31, 2013
Refill Instructions HP Cartridge C9352 22
2. Peal off the top label.
3. Fill the syringe with 5 ml. of color ink.
4. Very S-L-O-W-L-Y inject ink into each chamber until the sponge is full. A little ink might come out of the top when full, so cover up the other two holes while filling one.
5. When finished, replace the top label or leave it off (it will make no difference in the printing).
6. Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.
Or print Test pages.
Tuesday, May 28, 2013
Sunday, May 26, 2013
RESET WASTE INK TANK CANON
indicates :
WASTE INK TANK Full, printer has no respon
The Solutions :
1. Download i320 Service Tool or 350,355,250,255 Service Tool
2. Do service mode procedure to printer, the methods are ::
- Turn off printer, Take off USB cabel dan power cabel
- Push and hold POWER button, take on power, Turn on printer
- Indikator LED will be in green colour
- Push and let RESUME button, indicator LED will be in yellow colour
- Push and let RESUME button once more, indicator LED will be in green colour
- Let POWER button
This time printer in MODE SERVICE
Reset Manual i255-i355.pdf
ManualReset_i320.pdf
3. Do reset waste ink tank procedure with :
4. take on USB cabel
5. Do program General Tool
6. The Figure will be like this :
7. Choose the parameter no 1
8. Put on no 2 according to printer canon, DON”T BE WRONG!!!
9.Congratulation… printer has been in Reset.
Thursday, May 23, 2013
Canon Pixma MP210 Multifunctional Inkjet Printer
The badThe bad: No memory card slots; task feature sets arent as fleshed out as the competitions.
The bottom lineThe bottom line: If youre looking for the best print and scan quality from a budget all-in-one, the Canon Pixma MP210 is the one for you. Other models, however, offer more substantial feature sets.
Specifications: Office Machine Functions: Copier , Printer , Scanner ; Printer type: Multifunction printer ; Printing Technology: Ink-jet ; See full specs
canon iR Firmware Versions
iR2200/2800/3300 - Boot ROM 13.33C System 40.06 Message 40.06 RUI 40.04
HD Format10 G3 Fax 18.08
iR2200N/2800N/3300N - Boot ROM 13.33N System 40.06
iR2200i/3300I - Boot ROM 13.33N System 20.08N Message 20.08 RUI 20.05
HD Format 4 G3 Fax 18.08
iR5000/6000 - Boot ROM 13.53 System 17.01 RUI 15.05 HD Format 6
iR5000N/6000N - System 17.01N
iR5000/6000 (with BW2) - Boot ROM 9.28C 512 System 72.01 6326 RUI 71.01 434 HD Format 8
iR5000N/6000N (with BW2) - Boot ROM 9.28N System 72.01N
iR5000i/6000i - Boot ROM 9.28N System 8.02N Message 8.02 RUI 8.01 HD Format 7
iR7200 - Boot ROM 13.33C System 71.01 Message 71.01 RUI 70.20 HD Format 5
iR7200N - Boot ROM 13.33N System 71.01N
iR8500 - Boot ROM 13.33C System 71.01 Message 71.01 RUI 70.20 HD Format 10
iR8500N - Boot ROM 13.33N System 71.01N
iR105 - Boot ROM 13.33C System 71.01 Message 71.01 RUI 70.20 HD Format 5
iR105N - Boot ROM 13.33N System 71.01N
iR C3200 - Boot ROM 2.05 System 7.01 Message 7.01 RUI 4.02 HD Format 14 G3 Fax 51.02
Dcon 8.02 Rcon 3.01
iR C3200N - Boot ROM 2.05N
Canon iR 1022A
Description
Canon iR1022A: Summary
The compact iR1022A brings document feeding and 22 page per minute production to your desktop. Add double siding documents and energy saving features and youve found a winning formula for your office.
Canon iR1022A: Some Performance Features
Print / copy at 22 pages per minute - Double-sided documents - Document feeder - Superb 1200 dpi print resolution - Compact, desktop operation - great for small businesses - Easy network set-up - Energy save & instant recovery - Environmentally considerate
The iR1022A offers you brilliant communication for home offices and small businesses. The iR1022A helps you to be more productive with less effort. Copy beefy reports with the document feeder or print double sided presentations, all at a swift 22 pages per minute. Add an energy saving mode with instant recovery and you have the ideal solution for home offices or small business needing quick and cost-effective results.
Great for large documents. When you have large documents to copy, its great to have the flexibility to do it at your desk and in no time. Thanks to the built in document feeder, and electronic sorting, you can leave it to the iR1022A to get the job done with no fuss.
Effortless network integration is yours with the iR1022A. Youre not the only one who can benefit from the productivity enhancing benefits of the iR1022A. The iR1022A can be easily connected to your network so colleagues can take advantage too. Network printing is enabled using Canons advanced-performance proprietary printer language UFR II Lite, and a PCL printing option is also provided.
The iR1022A is space saving and scalable. Designed specifically to help enhance the productivity of small businesses and office workgroups, the iR1022A is a compact performer with big ideas. Configured with a generous 600 on-line sheets, you can enhance capacity further to a sizeable 1,100 A4 sheets if required.
Canon iR1022A: Design Features
Environmentally considerate production methods ensure that the Canon iR1022A complies with the European RoHS and WEEE* directives, prohibiting lead and hazardous substances from the manufacturing process. In addition the machine conforms to the International Energy Star Program.
*Restriction of Hazardous Substances (RoHS) and the EU Directive on Waste from Electrical and Electronic Equipment (WEEE)
Also Known As
E061 E100 Error Codes iR6570 Series iR5075 Series
* E061-0001 (Potential ON)
* E061-0002 (Potential OFF)
* E100-0001
* E227-0004
Cause
* The pin is broken on the Primary Fan 2 Duct. The Laser Shutter is activated by the pin on the Primary Fan Duct Assembly. The linkage is pinched not allowing the laser shutter to be fully actuated (may also indicate E227-0004). Faulty Laser Scanner Assembly.
* Defective DC Controller PCB Assembly.
Action
1. Check the shutter operation and the pin on the Primary Fan Duct Assembly. If the
pin is broken replace the Primary Fan 2 Duct (iR6570 : FC6-3540-000 / iR5075
FL2-5834-000) or the Primary Fan Duct Assembly (iR6570 : FM2-3074-000 / iR5075
FM2-9694-000). If the Laser Scanner Assembly (iR6570 : FM2-3670-000 / iR5075
FM2-9832-000) has been replaced and error codes E100-0001/ E227-0004 are
intermittently indicated, proceed to the next step.
2. Remove the Primary Fan Duct Assembly (this assembly has a pin on it
that activates the laser shutter).
3. Remove and reinstall the Laser Scanner Assembly.
4. Install the Primary Fan Duct Assembly. This should free the linkage
allowing the laser shutter to be fully actuated.
5. Finally a DC Con clear resolved both of the intermittent issues (E100-0001/
E227-0004)
Blank Image or Dark Fogging Image (Including Blank Areas) and E061-0001 / E061-0002 Errors Occur : iR6570 Series
Approved
Symptom
* Blank copies,Dark fogging
* E061-0001 and E061-0002
Action
When the above error code/image problems are experienced, perform the following:
1. Check the potential sensor wiring harness for any damage. This is caused by the harness being trapped between the hopper assembly and the cable tie head.
2. If the cable is damaged repair or replace as necessary.
3. Reposition the head of the cable ties on the cable guide in a downward position.
4. Input "1" under Service Mode > COPIER > FUNCTION > DPC > DPC, press the OK key and switch the Main power off and on so as to forcibly execute the Potential Control.
Wednesday, May 22, 2013
Epson Stylus Photo C91
Helos
I have to provide adjustment program Epson Photo C91, C92 you can download it easily. Adjustment
Epson program for Windows XP.
To reset waste ink pad counter C91 or C92 printers you have to:
- Run the program
- Choose Particulare Adjustment Mode - Choose Waste Ink Pad Counter
- Press INITIALIZE!
Adjustment Program epsonStylus photo C91,C92 download
Canon printer i850 i950 S600
Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing Select function with RESUME press POWER to execute: presses - light color - function
Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter
Canon i850 i950 S600
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing
Select function with RESUME press POWER to execute:
presses - light color - function
Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter
Canon Error Code E101 Canon Eror code E150 E151 E152 E153 E154 E155
(The head is not connected.)
E151 The thermistor of the head is open-circuited.
E152 The thermistor of the head is short-circuited.
E153 The trimmer resistance of the head is open-circuited.
E154 The trimmer resistance of the head is short-circuited.
E155 The trimmer resistance of the head is out of specifications.
E156 When a specific voltage is applied to the head, the voltage of the
head is not changed within a specific time.
E157 The voltage of the head is out of the specifications.
E160 The temperature of the head does not reach a specific temperature
within a specific time.
E161 The temperature of the head exceeds a specific temperature.
E170 When the pulse motor for the head scan is driven, it cannot be
detected by a sensor within a specific time.
E171 The motor is not connected to the pulse motor driver PCB for the head scan.
E172 The gate array employed to drive the pulse motor for head scan is faulty.
E180 The motor is not connected to the vertical scanning pulse motor driver PCB.
E181 The gate array employed to drive the vertical scanning pulse motor is faulty.
E182 After the vertical scanning motor is driven, the phase sensor cannot be
detected within a specific time.
E183 After the registration roller cam clutch 2 is turned ON, a given
paper size cannot be detected within a specific time.
E190 RAM directly connected to CPU is faulty.
E191 An error occurs in the communication with the microcomputer (D/A
converter) for high voltage use.
Tuesday, May 21, 2013
Resetter Epson Stylus Photo R230 R220 and R270
Before run adjustment program or software resetter Epson Stylus Photo R220 and R230, set date setting in your computer to 12 January 2006. Appearance of adjustment program Epson stylus photo R220 and R230 like adjustment program for Epson C45. Your Epson Stylus Photo R220 and R230 must be installed correctly in your computer before using the software otherwise so this software resetter will not be used.
Here how to use the software
* Download and extract downloaded software and run it.
* Click accept button.
* Set model name, port selection and destination setting and equal
to your printer.
* Click Maintenance Tab.
* Check mark waste ink pad counter.
* And the clear the protection counter (reset counter to zero)
* Then click Ok, Ok
* done
=> adjusment program Epson R220 - R230
=> adjusment program Epson R270
Download manual service
and any way if epson r230 blinking you can use SSC
klik at => SSC 4.3 and there are tutorial and how to use it.
Please to be Patient and if any one want something else please give me comment down here Ok
thanks guys 4 all comment
Canon MP110
step by step
Reset Printer Canon MP110
1. Enter SERVICE MODE By pressing Menu-Scan-Copy-Scan
2. Enter NVRAM by pressing <--- or ---> then OK
3. Enter CMY ink level by pressing <--- or ---> then OK
4. Select 1 by pressing <--- or ---> then OK
5. Enter K ink level by pressing ---> then OK
6. Select 1 by pressing <--- or ---> then OK
7. Press reset ( design: // )
Canon PIXMA MP750 Error 6A00
The alarm light was flashing and the LCD message said to "CHECK PRINTER (PRESS [OK])"
Heres what I did (after doing a hundred other things that didnt work):
1. I opened the printer as if I was changing an ink cartridge.
2. The ink cartridge carriage did not move to the center as it should (one of the symptoms).
3. I moved the ink cartridge by hand to the far left to expose the ink purge area at the far right (under the area where the ink cartridge carriage typically parks itself).
4. I used a small make-up mirror from my wife and a flashlight to look for paper fragments or anything else that might be jammed around in the ink purge area. The mirror was indispensable for viewing areas I couldnt possibly see otherwise.
5. Eureka! I found a some ink-soaked paper fragments crumbled against a roller near the ink purge
6. Now the fun part. While wearing a head flashlight and viewing the small paper jam in the mirror, I used tweezers and needle nose pliers to extract the paper. It was like "Operation," a game I played as a kid, except every movement I made was backwards because of the mirror. It also required some moves that would challenge a circus contortionist.
7. I closed up the printer, hit the okay button, and the printer made some noise like it might work. Unfortunately, the alarm light stayed on. I opened the printer again and noticed that the ink carriage repositioned itself. I took this to be a positive sign as it didnt do this before.
8. I closed up the printer again and hit the okay button again. After several "please wait" messages on the LCD, and positive sounding noises from the printer, the alarm light went out and the printer seemed ready to print.
9. I ran a few test pages through and they printed fine.
Canon BJ F900 F890 F700 F500 S900 S820 S750 and S520
Press and hold the RESUME button, then press and hold the POWER button.
Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily.
You are now in Service mode.
Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
1. service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)
After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a resta
Monday, May 20, 2013
canon iR system versions
Main 38.02
NIC 3
Finisher L1
iR2200/2800/3300
- Boot ROM 13.33C
- System 40.06
- Message 40.06
- RUI 40.04
- HD Format 10
- G3 Fax 18.08
iR2200N/2800N/3300N
- Boot ROM 13.33N
- System 40.06
iR2200i/3300i
- Boot ROM 13.33N
- System 20.08N
- Message 20.08
- RUI 20.05
- HD Format 4
- G3 Fax 18.08
Error Code E064 Canon iR3300 Series
E064 is indicated on the control panel. The error description is: The presence of a high voltage error is communicated by the composite power supply. The output for primary charging, developing, or transfer has deviated from a specific level of voltage.
Cause
* Adjustments in Service Mode are Incorrect
* Transport Assembly is Not Engaging Properly
* Dirty HVT Contacts for Developing Assembly and Charging Rollers
* A Paper Clip on HVT Contacts or Developing Assembly
* Faulty Transfer Roller
* Faulty Static Charge Eliminator
* Defective Composite Power Supply
* Defective DC Controller PCB Assembly
Action
1. Check the values in Service Mode and make sure they correspond to the Service
Label. If the copier receives a spike or surge through the 240V line these values
can change (can also give you blank copies). Take particular note of the Dev Bias
setting. [COPIER > ADJUST > DEVELOP > DE-DC]
2. Make sure the Transport Assembly is engaging properly. The Transfer Roller should
make good contact with the drum. Check condition of screw (XB6-7501-007) and
Pressure Plates (FB5-4816-000 & FB5-4817-000) for the Transport Assembly.
3. Clean HVT contacts for Primary/ Transfer Charging Rollers and Developing
Assembly. Inspect for any paper clips.
4. Replace the Transfer Roller (FF6-0104-000).
5. Replace the Static Charge Eliminator (FF5-7246-000).
6. Replace Composite Power Supply followed by DC Controller PCB Assembly.
Reset MP390 Waste Ink Full Tank
The below reset procedure worked for me. I did not have to clean the waste-ink sponge. Many thanks to lp who originally posted it and to "Anonymous" who reposted it.
1)Printer on, press Additional Functions, Scan, Copy, Scan
Now you should be in service mode from there for waste ink tank reset
2)Select Test mode which is like the last avalabe selection
3)Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button
The menu will now say EEPRON Clear
Select Ink count which is option (0) and press set
Then press Stop/Reset Followed by the power button and then wait for it to restart.
iP Tool : Download
EEPROM Printer Canon ip6210D/6220D/MP170/MP450/2200/ip600 Download
MPTool MP150/MP160/MP170/MP180/MP450/MP460 Download
Step By Step Resetter canon MP Download
Canon PIXMA iP4680
Quality Comes Faster
• 4 x 6” (4R) borderless photo in approx. 20 sec
• Capable of printing borderless photos up to A4 size
Advance Media Handling
• Auto Duplex Printing encourages printing on both sides to save paper
• Two Way Paper Feeding offering you convenience and time savings
• CD/DVD Direct Printing – customize and print your very own CD/DVD labels at home
Memories That Wont Fade
• ChromaLife 100+ technology - photos can last up to 300 years
Connectivity
• PictBridge
• USB 2.0 Hi-Speed
Free Software Sets Your Creativity Free
• Easy-PhotoPrint Ex
• CD Label Print
Environmental Friendly
• Conforms to EU RoHS
• Supports International Energy Star Program
Sunday, May 19, 2013
CANON iR2200 iR2800 iR3300 SERVICE MANUAL
This Service Manual provides you with all technical information relating to the basic configuration decided for Canon iR2200/iR2800/iR3300.
Table of contents Canon iR2200/iR2800/iR3300 Service And Repair Manual Copier
* Maintenance And Inspection
* Image Adjustment Basic Procedure
* Standars And Adjustments
* Troubleshooting Image Faults Manlfunctions
* Service Mode
* Self Diagnosis
* Upgrading
* Appendix
Manual Service Copier Download
Printer HP
To clear the Maintenance Service Message from the LCD display:
Printer
HP IIISi Printers:
- Press ONLINE until the light goes off
- Hold down MENU until PCL CONFIG MENU appears
- Press the MENU key until SERVICE MSG=ON* appears
- Press the + or - key to change display to SERVICE MSG=OFF
- Press ENTER/RESET MENU key to turn message off, the * should appear, then press ONLINE
Printer
HP 4Si Printers:
- Press ONLINE until the light goes off
- Press MENU until CONFIG MENU appears
- Press the ITEM key until SERVICE MSG=ON* appears
- Press the + or - key to change display to SERVICE MSG=OFF
- Press the ENTER key to turn message off, the * should appear, then press ONLINE
Printer HP 5Si:
- Press MENU key 4 times for CONFIG MENU
- Press ITEM to display SERVICE MESSAGE=OFF
- Press ENTER
- Press ONLINE
Printer HP 4000/4050/4100/5000 Printers:
- Turn the printer off
- Hold down the left side of the ITEM and VALUE +/- keys, turn the printer on and wait until RESET MAINTENANCE COUNT is displayed and then release the keys
Printer HP 4500/4550 Printers:
- Turn the printer off
- Hold down the CANCEL JOB and SELECT keys and turn the printer on, then wait until the display goes blank and the three LEDs come on
- Press the right side of the MENU key, then press the SELECT key
- You will enter SERVICE MODE after the normal test completes
- Press the ITEM key until the FUSER MAINTENANCE COUNT appears
- Press VALUE +/- to change to zero
- Press SELECT to save
- Press GO; the printer should return to READY
Printer HP 8000/8100/8150 Printers:
- Press the MENU button until the display reads CONFIGURATION MENU
- Press the ITEM button until the display reads SERVICE MESSAGE = ON/OFF
- Select OFF*
- Press SELECT to save
- Turn printer off
- Hold the VALUE MINUS and ITEM MINUS buttons while turning the printer back on Hold buttons down until display reads RESET MAINT/COUNTand then release both buttons
Printer HP 9000 Printers:
- Turn the printer off
- Press and hold the CHECK key
- Power on the printer
- Release the CHECK key after all three lights come on The display should read SELECT LANGUAGE.
- Press the up arrow until MAINTENANCE KIT is displayed, then press the CHECK key again and the maintenance kit count has been reset
HP Color LaserJet 4500/4550 Printers (TRANSFER KIT RESET):
- Press the MENU button until the RESETS MENU is displayed
- Press the ITEM button until TRANSFER KIT SELECT IF DONE is displayed
- Press the SELECT button
- Press the GO button to return to READY
HP Color LaserJet 4600 Printer (IMAGE TRANSFER KIT (ETB) RESET):
- After Maintenance is performed, the display should read NEW TRANSFER KIT =
- Press the down arrow to highlight YES, then press the CHECK button to reset Or enter CONFIGURE DEVICE in menus, choose RESETS then RESET SUPPLIES, choose NEW TRANSFER KIT and select
HP Color LaserJet 4600 Printer (FUSER KIT RESET):
- After Maintenance is performed, the display should read NEW FUSER KIT =
- Press the down arrow to highlight YES, then press the CHECK button to reset Or enter CONFIGURE DEVICE in menus, choose RESETS then RESET SUPPLIES, choose NEW FUSER KIT and select
HP Color LaserJet 8500/8550 Printers (TRANSFER KIT RESET):
- Press the MENU button until the RESETS MENU is displayed
- Press the ITEM button until RESET TRANSFER LIFE COUNT is displayed
- Press the SELECT button to reset, then GO to return to READY
HP Color LaserJet 8500/8550 Printers (FUSER KIT RESET):
- Press the MENU button until the RESETS MENU is displayed
- Press the ITEM buton until RESET FUSER LIFE COUNT is displayed
- Press the SELECT button to reset
Canon Error Code E073 E074 E075 E076 E077 E079 E080 E081 E082 E083 E084 E085 E086 E089 E090 E091 E100
E073 The transfer drawer connector or the transfer frame drawer
connector is not connected as the front door is closed.
E074 The transfer belt unit does not reach the target position within a specific time.
E075 The transfer belt is off to the side.
E076 The transfer belt web is wound up
completely.
E077 The motor inside the transfer belt unit
has a fault.
E079 The home position (to apply pressure) of the transfer drum cleaner unit cannot be detected.
E080 An error occurs in the communication with the multi color unit controller PCB.
E081 The vertical motor clock is faulty.
unit E081 The vertical motor clock is faulty.
E082 The horizontal motor clock is faulty.
E083 The CD unit horizontal movement right sensor is faulty.
E084 The CD unit horizontal movement left sensor is faulty.
E085 The CD unit feeder release sensor is faulty.
E086 The CD unit claw release is faulty.
E089 A malfunction of the multi color
E090 The document feed motor is not
functioning properly.
E091 A failure in the detection of the document feed sensor.
E100 The BD signal cannot be detected within a specific time.
Canon PIXMA MP800 Error 6A00
The 6A00 is a Canon generic code for paper path jam. Some where in the paper path a sensor is activated indicating paper jam so the printer will give off a 6A00 code. As a Canon tech, I usually find the code, almost 90% of the time, is related to the purge unit being jammed with something and not being able to move. Moving the print head assembly will not clear a purge unit if its jammed with paper, paper clips, push pins, screws, cookie crisp, flower bud pods or the like. And yes I have found all those things in a purge unit. The offending item needs to be removed or the purge unit needs replacement. A Pixma MP830 would still be under Canon warranty, get it into a shop and save yourself the hassel.
Incidently, the 6A00 error pertains to all Canon printers made in the last several years, its not just used in one model. And its always a paper path error or purge unit.
I forget myself so here goes, the purge unit, called a spittoon assembly in an HP, lexmark, and other inkjet printers, is where the print head assembly parks when not in use, also its other job is to clean and make sure the print head is clean and open for printing. That is why youll find the print head assembly parked on top of it. It also has a an electrical pump to milk the print heads and test for ink flow.
Saturday, May 18, 2013
Epson Stylus Pro 4000 Waste Ink Counter Reset
- While Powering up the printer, hold down the the left arrow, down arrow, and Up arrow buttons
- You will get a “Self Testing” message.
- Use the Up Arrow button to select the “Clear Counters” menu.
- Press the right arrow button (the Menu button).
- Scroll through with the up/down arrows to select “Maint Tank”
- Select with the right arrow and execute with the right arrow
- Turn your printer off then turn it back on.
Epson Stylus Pro 7900 Printer
Epson has launched two new additions to its Stylus Pro inkjet printer range, the SP7700 and SP9700. At 24in and 44in respectively, the Epson Stylus Pro 7700 and 9700 are packed with the latest Epson technologies that add precision, reliability and productivity to a wide range of professional printing applications.
Epson technology is renowned for delivering fast, efficient printing. The Epson Stylus Pro 7700 and 9700 are designed to produce faster output without compromising print quality, by using advanced compression and decompression technologies that speed up data during printing. The printers feature the latest Epson MicroPiezo TFP print head, which is optimised to work with a five colour ink set, a subset of Epson UltraChrome HDR Ink incorporating cyan, vivid magenta, yellow, photo black and matte black. The print head delivers perfectly accurate dots with virtually no misting or satellites. Perfect smoothness and detail is down to Epson Variable-Size Droplet technology (VSDT), which can produce droplets as small as 3.5 picolitres.
The Epson Stylus Pro 7700 and 9700 produce prints with even more impact thanks to the Vivid Magenta Technology. Vivid Magenta gives a wider colour gamut, which in turn provides enhanced colour accuracy. This is particularly noticeable for blues, magentas, reds and oranges, giving prints a more natural and life-like appearance. The ink set also includes both Matte and Photo black inks, which maximises quality on any given media. The printer automatically selects the optimum black ink to match the media, which adds convenience and productivity to the printing process and reduces cost.
Prints from the Epson Stylus Pro 7700 and 9700 are highly light-fast and will retain their colour and quality for longer, wherever they are used. The specifically formatted pigment inks are water-resistant and have excellent colour stability, for long-lasting prints which are dry and stable very shortly after emerging from the printer.
There is a range of features of the Epson Stylus Pro 7700 and 9700 which makes the printing process as easy and as flexible as possible. Fast network connection, clear control and straightforward operation and maintenance are built in. The high-visibility 320x200 pixel control panel screen shows all aspects of the printer from ink levels and quick cleaning to paper cutting and job cancellation. Barcode printing is a way to keep track of media during changes and can eliminate misprints due to lack of media. The new spindle-less flange system makes changing roll paper easier and takes up less space. It handles a wide variety media types, sizes and tensions and the new rotary paper cutter is more durable, cuts smoothly and cleanly in seconds, so there is no need for manual cutting.
Intelligent software helps users get the most out of the Epson Stylus Pro 7700 and 9700 by keeping track of all aspects of printing, streamlining the workflow and enhancing creativity. The new intuitive printer driver is easy to use and can be customised for different levels of information and print and media settings. These printers include the drivers to support the AutoCad HDI interface for high speed and precision accuracy.
Epson’s Layout Manager, a new function within the printer driver, enables the easy importation and layout of data created in various applications. Functions such as Move, Enlarge/Reduce, Rotate and Fit-to-Roll simplify workflow and reduce waste.
Epson Stylus Pro 7700 and 9700 key features summary:
· Advanced 10-channel Epson MicroPiezo™ print head
· 5-colour Epson UltraChrome HDR (subset) ink technology with Vivid Magenta Technology – Cyan, Vivid Magenta, Yellow, Matte Black and Photo Black
· 1440x1440 dpi resolution with Epson Variable-sized Droplet technology
· Handles roll or cut sheet media up to 24” for SP7700 and 44” for SP9700 and 1.5mm thick
· New flange roll holder for fast and easy media changeover
· 2.5” colour LCD control panel with white backlight
Adjustment Epson Stylus Photo 1390
Description
6-colour premium-grade A3+ size prints within the reach of your budget
Reduce Costs with INKdividual™ Cartridges
* Cost-efficient INKdividual™ cartridges
* Optimise ink usage and reduce expenses
* Replace single cartridges when any colour ink runs out
* Eliminates wastage of throwing away an integrated cartridge with remaining ink in other colours
Fast Speed to Stay One Step Ahead
* Swift print-outs of up to 15ppm for colour and monochrome
* 5 different droplet sizes with Advanced VSDT
* Portrays the most subtle colour transitions
* Optimized speed performance
When Print Size Matters
* Eye-catching prints of up to A3+ BorderFree size
* For beautiful design proofs, impactful promotional materials, and exhibition-quality photographs
* Affordable large prints versatility for small business outfits
Striking Visual Expression
* Specially formulated New Photo Ink for the finest visual prints
* Wider colour range and glossy finish
* Vivid rendition of black-and-white portraits, artwork and soothing landscapes
* Maintain and keep photo prints for the long term
* Lasts up to 200* years in photo album storage
Quality that Makes a Difference
* Images are portrayed superbly up to 5760x1440 dpi
* Advanced Micro Piezo print head with VSDT technology
* Minimum 1.5pl ink droplets for the smoothest graduation
Adobe RGB Support for the Serious Photographer
* Innovative Adobe RGB colour mode solution
* Brilliant colour expression
* Accurately depict the wider gamut of images captured on professional
digital cameras
* Wide range of colour output modes
* Indispensable for the graphic professional, the business user,
or the photo enthusiast
Improved PhotoEnhance for Flawless Photos
* Print perfect photos with no hassle
* New improved EPSON PhotoEnhance™ Technology
* Intelligent software analysis to determine optimal image settings
* Automatic adjustment of colour cast, backlight and skin tone
Effortless Usage with EPSON Creativity Suite
* One-stop photo software solution
* Neatly manage all your digital images
* Print beautiful, high-quality photos easily with Easy Photo Print
* Supports many RAW image formats for professional needs
Download Link :
Adjustment Epson Stylus Photo 1390
The Secret Resetter Code for Canon i320 i255
Waste Ink Counter Reset.
Step 1 : Manual Temporary
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.
or Step 1: Manual Temporary
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.
step 2 : Software for Permanant
1. Reconnect the printer cable.
2. Open General Tools software and select (USB PORT)
3. Choose (SET DESTINATION 1) And it should be reset.
Remark “After service mode Pls use software for permanent reset”
Printer Epson R230X resetter
Download SSC Service Utility software. Click here to get the software.
The steps:
1. Make sure printer in the living conditions and are connected with a computer
(driver printer sudah terinstall)
2. Instal SSC Service Utility and run the program
3. Setting configuration printer model.Choose Epson Stylus Photo R230. then close the main window.
4.At the bottom right taskbar clik right icon SSC Service Utility, choose Protection Counter -> clik reset protection counter -> choose Yes at pop up which is ask “Have you Replace waste ink pad”
5. Restart printer, and printer no blinks anymore.
Download software (v4.30)
Follow the steps above. I’ve tried myself. Good luck .
Friday, May 17, 2013
resetter printer epson cx3900
Here this step to use resetter printer epson cx3900
- Switch on printer
- Set the computer date setting date to 23 january 2007
- Run adjprog.exe from the extracted folder
- Click accept
- Click particular adjustment mode
- Go to maintenance then Select waste ink pad counter then click ok
- Click on "check button" till its done then click on "initialization button" then click on "finish button"
- Switch off printer for 5secs then switch on again
- After you reset succesfully, you can change the date back to normal
Epson Stylus Color C20 C40
Since your printer consumes ink not only for printing but also for other operations like cleaning, a certain amount of ink is wasted and it is collected by the waste ink pad. Therefore, the printer counts the amount of waste ink.
Once the amount of waste ink reaches the predefined limit, the printer indicates "MAINTENANCE REQUEST" and the waste ink pad should be replaced. Also, you must reset the maintenance error condition and the waste ink counter value stored in EEPROM on the mainbord of the printer.
The adjustment program enables you to perform maintenance and adjustment functions such as:
- EEPROM initial setting
- Ink Pad Counter reset
- Initial Ink Charge
- Head ID Setting
- Top margin Adjustment
- Bi-D Adjustment
- USB ID Input
This service program can be Adjustment program epson downloaded FREE!
Today you can download FREE Service Programs:Epson Stylus Color C41, C42 printer service program (under Windows 98 only) download (462kB) FREE!Epson Stylus Photo 900 printer service program (under Windows XP, 2000) download (571kB) FREE! Stylus Epson Stylus Color C60 printer service program (under Windows 98 only) download (609) FREE!EPSON C67 Reset Software
this technology is not really worth buying for.
this because if can can just figure out how this printer feed ink by original cartridges you can see easily the problem brought by this CISS.
Basically the main problem is the pressure difference between the tank and the ink delivery cartridges with the built-in auto reset chips, this, even just simple pressure calculations you can actually derive a negative pressure pulling the ink towards the tank,
every after printing (if you can notice) you have to do the routine head clean-up and therefore wasting a lot of ink. base from experience it would be much better if you just refill the original cartridge and transfer the auto reset chips to the genuine cartridges.
so by doing this you can save the life of your printerhead, ink pad etc. also the original cartridge contain a sponge which also aid in filtering the refilled ink unlike the ciss cartridge that has none.
Free Download
Epson new cartridges T073 73N
Since August 2008, Epson released a new range of printers and cartridges (like T073/73N cartridges) which will only work with each other.
For example,
CX9300F made before August 2008 can take T0731, 732, 733 and 734 cartridges, and T073/73N cartridges.
CX9300F made after August 2008 can only take T073/73N cartridges.
If you are unsure when your printer is manufactured, just check your user manual and see what cartridges do it need.
The Secret Resetter Code for Canon S900 S820 S750 S520
1. Turn off the printer.
2. Press and hold the RESUME button, then press and hold the POWER button.
3. While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
4. The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.
5. Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
(a). Service/factory test printout, including ink sensor check
(b). EEPROM info printout
(c). EEPROM initialization
(d). Clear the waste-ink counter
(e). Printer model setting. (more selections beyond this- leave this alone)
6. After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.
Thursday, May 16, 2013
The Secret Resetter Code for Canon S450 Printer
1. Power off printer
2. Hold Resume button then press and hold POWER, the beeper will sound once.
3. Hold POWER and release RESUME
4. Press RESUME twice
5. Release Power button
6. When the indicator lights steady, press RESUME 3 times. The indicator should be orange.
7. Press Power to set data
The Secret Resetter Code for Canon BJC-2000 BJC-2100 Serie
1. Remove the Cartridge
2. Unplug the AC Power Cord
3. Close Front access panel
4. Hold down the RESUME/RESET button and plug in the AC power cord
5. Release RESUME/RESET after plugging in the AC Power cord.
6. Press the RESUME/RESET once within 5 seconds and release the RESUME/RESET.
7. Press and HOLD RESUME/RESET for two seconds or more and release it.
8. Press and HOLD RESUME/RESET for two seconds or more and release it.
9. Unplug AC Power Cord to set data.
Inkjet Printers Epson Stylus T11
This printer is cheap but high-resolution support. Suitable for home users and the lovers photographi. Because, other than the results of the high-molder also molder lasting results.
Printers target this segment of the home have the highest resolution in the class, which can reach 5760x1440 with Variable-sized Droplet Technology. By using the technology, Epson T11 able to produce a text that is more sharply, the more beautiful colors and prints of the results of a more durable.
Ink default printer features Epson Durabrite Ultra Link, and pulling the ink in the design in such a way so resistant to water and mold can not make the results quickly terdegradasi. In this case, the Epson picking cetakkannya that the results remain sharp and beautiful for many years.
Not to burden the users in terms of the cost of replacing the cartridge, the stylus T11 has also features sparingly with the Epson INKdividual Cartridges for Maximum Savings. Where each cartridge is inserted independent. Which means that, if a certain color cartridge out, so users only need to replace the cartridge out of it. This is of course more cost-efficient compared to a combined cartridge, which must replace the color cartridge 1 still contains the other.
Epson Stylus T11 mempu print speed with 22 page document didnt per minute and 33 color pages to the document. Meanwhile, to print the photos needed time 156 seconds, to the size of 10x15cm or 4x6 inch borderless with a maximum resolution. The results of mold tray can hold up to 80 sheets of paper A4
In it, the software is also available from Epson Perfection Photo Creativity Suite. This software can mongkustomisasi images in which you want to print. So users do not need to look more photo-processing software daro third parties. With this software, users can get results than a photo lab printing photos. For not caused, Epson PhotoEnhance can also automatically to Adjust the picture to a photo image will be printed in color have a more beautiful color.
Epson Stylus T11 berdimensi 435x219x165mm with a weight of 2.8 kg. The operating system didukungnya is Windows 2000, XP, 32 and 64 bit and Windows Vista. For Macintosh users can use the operating system MacOS 10.3.9 to the top of the series. When the printer work requires power only 11 watts.
adjustment program epson stylus
free download
Resetter Epson T13 T1100 TX121
To friends who printer technician needs resetter Epson T13, TX121 and T1100 or for collection maybe someday you need it.Please download link software reseter Epson T13, TX121 and T1100:
Resetter Epson T13
Resetter Epson TX121
Resetter Epson T1100
or SSC Service Utility
Wednesday, May 15, 2013
SSC SERVICE UTILITY
Problems with my Epson printer, the red and green light began flashing and a window popped up, saying, take it to your services center because some parts have reached the end of their life.
Printer companies set a “protection counter” on all printers , it’s an internal counter measuring the amount of ink wasted by head cleaning.
Reset the "protection counter" as well as clean the “waste ink pad overflow”.
1. Unplug the power and USB cables from the printer. Pry open the printer,
careful not to break anything. Use a flat blade screwdriver to pry it apart;
there are two-three tabs at the back and two at the front. Gently push them in,
and then using a bit of force pry apart the cover.
2. Next remove the two (2) waste ink pads.
They are located at the back on the left hand side. I used the flat blade
screwdriver to lift up the ink pads (they were soaked).
Please use rubber gloves as it gets very messy.
3. Next wash them with just plain hot water until they are white again.
I just let the hot water run on them (the pads are about three inches long).
4. Once washed dry them using a hair drier. (you could place it the sun for
a few hours or on top of your heater or maybe in a heated oven; (make sure you do
not set it on fire with too much heat).
5. Once dried place the pads back in the ink waste bin at the back of the printer.
6. Closed the printer cover and put back all the pieces and plug in the USB
& power cable and turned it on. (Yes the lights are still flashing).
7. Go to this link and download this software: SSC Download
8. Install the software and run it.
9. Select your printer and model number. It will ask if you replaced with new pads;
say “YES”. Then close the window.
10. Now right click on the SSC service utility, it looks like
a printer icon near your clock in the task bar.
11. Then click on reset counters. You can do all other stuff with this utility too.
12. Turn off the printer power and then turn it on again.
If necessary un-plug the power cord from the back of the printer,
wait 20 seconds. Plug it back in.
13. IT WORKS AGAIN.
Stylus Photo R390
- Turn on the printer
- Set the pc date setting to 1 January 2007
- Adjprog.exe run from the extract of a folder (or locate the file or application. Exe and run it)
- Click accept
- Click on the particular mode adjustment
- Go to interview Then select waste ink pad counter then click ok
- Click "button box" until it is done then click "initialization" button and then click "finish button"
- Turn off the printer for 5secs then turn again
- Set the date today.
Resetting cartridge Epson R290
When I have trouble on my cartridge R290, is currently the forums neighbors.
Hopefully it can help you .
The original cartridge of R290 havechip system that calculates the number of print-out that we already do, after reaching the maximum limit will require the replacement of the printer cartridge.
This also happens on the system infus R290, infus implement this system combine the chip, which is equipped with a switch / switch on the top of the cartridge.
Function of this switch is to reset the volume of the print cartridge if the replacement cartridge is required, meaning we R290 printer "deceit" as if we have to change with a new cartridge.
Note: almost all types of printers epson latest chip I use it is difficult to be modified, with different types such as the previous R230, R250, C67, etc., which can be reset to its done in auto, for the latest types of reset is done with the help of user / users.
Heres How to reset cartridge R290:
(The need to reset the printer cartridge, printer will give you a warning, a light red / orange blink-blink in the reset button (on the power button)).
Open the printer cover
Remove the paper / material feed sensor cover,
Press the reset (the power button) several times (1-3x), to the position of the cartridge in the position of the replacement cartridge (right),
Pejet button switch on the cartridge (rather long), then release,
pairs back penyumpal paper sensor cover
close the back cover printer
press reset button again, the printer reacts to give voice to the paper I draw a very long time,
the printer is ready for use again,
The way above will be done each time the printer requires replacement cartridge, which is marked with a light reset blink-blink red / orange.
this is the resetter.
Resetter R290 Download
It’s FREE.
Good luck
SSC Service Utility versions 4 10
- support for PictureMate
- support for RX700
- support for R2400
- support for PM-A700
- support for PM-G720
- support for RX520
- support for CX7800
- support for CX4100
- support for DX3800
- support for CX3800/CX3810
- support for CX3700
- support for C67/68 and Photo Editions
- support for C87/C88/D88 and Photo Editions
- support for R220/R230
- support for R320
- support for CX4500
- support for CX3650
- various bug fixes
Resetting Epson Chip Printers for free
Yes, there is software out there that will allow you to reset your Epson Chip printers.
Before we go and give you the link we first want you to understand a few things:
1. This software is a very poweful piece of software and should not be used without first reading the accompanied instructions.
2. We have no stake in this software and there is no finacial benefit for our recommending it. We do recommend it because it is out there and works . We are in the ink business, not the chip reset business. Any way we can make it easier for you to refill benefits us greatly
3. Due to some recent architecure changes in chip design some printers can not have their chip reset with the softwa, but the software will allow you to store the values of a full status. If this alternative does not fufill your needs we do have available chip resetters by request.
SSC Service Utility
Tuesday, May 14, 2013
Resetter Printer Epson CX7300
1. Switch on printer
2. Download Adjustment program Epson
2. Open auto.bat to set the date to 17 January 2006
3. Run adjprog.exe
4. Click accept
5. Click particular adjustment mode
6. Go to maintenance then Select waste ink pad counter then click ok
7. Click on "check button till its done then click on initialization button
then click on finish button
8. Switch off printer for 5 secs then switch on again
9. After you reset succesfully, you can change the date back to normal
SSC Service
SSC Service allow you to do many amazing things with Your Epson printer :
1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported
This allow many people with high printing demands to save some money (program works with both black and color cartridges).Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.
NOTE ! You can lost Epson lifetime guarantee on print head by refilling ink cartridges!Please, read all instructions in help file before doing anything with Your printer!Please, post filled test report form generated by the program (test report button) to us in case of any software problem or if Your printer is unsupported by this software (read instructions how to make test report in this case in help file)
NOTE!
1) This is freeware project, so it is illegal to take money for this software.
2) Distribution of this software from any site other then www.ssclg.com or one of our official partners sites
is prohibited!(с) 2002-2007 SSC Localization Group
The Secret Resetter Code for Canon S9000 S300 S400 i550 i560 i850 i860 i865 i9100 i9950 PIXMA IP3000 above
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.
EPSON Stylus Photo 750 Counter Reset
This program can be used with following conditions:
- Download this program
- Change the date on your PC to February 1 2007.
- Run the program. It will give Expired Program message.
- Exit program.
- Delete the folder - C:/Adjustment Programs/ on your PC.
- Run the program. It has to work perfectly this time!
After Feb 22, 2007 the program has been expired,
but you can RUN it using instructions at the UP of the page
Service Adjustment Program Stylus Epson
Epson Stylus Color type 480,580,680,777,780,790,860,1160,61,62,70,825
830,870,890,950,1270,1280, printer service program download (336) FREE!
This is the most downloads for reseters ( according to my downloads count )Just download at this link :
stylus photo C67 Download Free
stylus photo 510 Download Free
stylus cx3900 Download Free
stylus Photo R210 Download Free
stylus Photo R310 Download Free
stylus Photo C58 Download Free
stylus C60 Download Free
stylus Photo C59 Download Free
stylus Photo C20,40 Download Free
stylus Photo C41,42,43,44,45,46 Download Free
stylus Photo C61,62 Download Free
stylus photo C63,64 Download Free
stylus photo 83,84,85 Download Free
stylus photo C67,68 Download Free
stylus photo C65 Download Free
stylus Color 580 Download Free
stylus Color 680,777 Download Free
stylus photo C80,70 Download Free
stylus Color 780,790 Download Free
stylus Color 925 Download Free
stylus Color 1520,3000Download Free
stylus Collor 880 Download Free
Monday, May 13, 2013
Stylus Photo RX650
src="http://pagead2.googlesyndication.com/pagead/show_ads.js">
Here this step to use Resetter Printer Epson RX650
- Switch on printer
- Set the pc date setting to 13 february 2007
- Run adjprog.exe from the extracted folder
- Click accept
- Click particular adjustment mode
- Go to maintenance then Select waste ink pad counter then click ok
- Click on "check button till its done then click on initialization button then click on finish button
- Switch off printer for 5 secs then switch on again
- After you reset succesfully, you can change the date back to normal
Epson Printers Resetter
Before we go and give you the link we first want you to understand a few things:
- This software is a very poweful piece of software and should not be used without first reading the accompanied instructions. Read all documentation before using.
- We have no stake in this software and there is no finacial benefit for our recommending it. We do recommend it because it is out there and works . We are in the ink business, not the chip reset business. Any way we can make it easier for you to refill benefits us greatly
- Due to some recent architecure changes in chip design some printers can not have their chip reset with the software, but the software will allow you to store the values of a full status. If this alternative does not fufill your needs we do have available chip resetters by in our store as well as auto-reset chips.
Below the link to SSC service utility home pageis a list of updates and supported printers. The level of supported printers varies dependingon the type of chip used on the cartridge & printer firmware.
Adjustment Program Epson R230
Dear All Resetter semua yang ngga bisa ngisi date adjusment program r230 anda bisa download di
kaga perlu ngisi lagi langsung jalan.
=> adjusment program Epson R220 - R230
=> adjusment program Epson R270
n any way klo blinking epson r230 nya pake SSC aja udah bisa koklik aja => SSC 4.2 n tutorial nya didalamnya juga ada cara pake nya juga
Please to be Patient and if any one want something else please give me comment down here Ok
thanks guys 4 all comment
SSC Service Utility versions 4 30
- support for R240
- support for R340
- support for CX2800
- support for CX3900
- support for CX4900
- support for CX5900
- support for C58/C59
- support for RX640
- improved support for C2100/2200
- improved support for RX700
- improved support for R2400
- improved support for 785EPX/825/895/915
- some other improvements and bug fixes
Sunday, May 12, 2013
Reset Waste Ink Pad Counter Epson C 90
firstly, download Resetter for Epson C90 Epson C90.And Resetter for Epson C110 download here. The method how to reset C90 and C110 is not different, u just change the date.
I. The Methods how to Reset Epson C90:
a. Surely your printer joined to computer,turn on printer.
b. Ekstrak resetter C90.
c. See folder resetter_epson_c90. turn reset.bat, change date be
10/07/2007.
d. Minimize command prompt reset.bat.
e. Turn “AdjProg.exe”.
f. Klik “Accept”.
g. Klik “Particular adjustment mode”.
h. Then choose Waste Ink pad Counter OK.
i. Klik button “Check”, till process finish.
j. Klik button “Initialization” then klik “Finish”.
k. Power off printer, then turn on .
l. If success, come back to command prompt reset.bat. Change date
as usual.
m. Surely printer C90 normally, test print.
stylus photo C90 Verion Indonesia download
stylus photo C92 Version Singapore download
Epson Stylus Pro 4000 Waste Ink Counter Reset
* While Powering up the printer, hold down the the left arrow, down arrow,
and Up arrow buttons
* You will get a “Self Testing” message.
* Use the Up Arrow button to select the “Clear Counters” menu.
* Press the right arrow button (the Menu button).
* Scroll through with the up/down arrows to select “Maint Tank”
* Select with the right arrow and execute with the right arrow
* Turn your printer off then turn it back on.
Epson Stylus T20E
Deskripsi
Amazing print speed, superb quality and longer lasting prints
Enjoy speed high quality and affordable printing with the Epson Stylus™ T20E
Assured Quality with Epson DURABrite™ Ultra Ink
* Ideal all-purpose ink for everyday printing
* Smudge, water and fade-resistant qualities ensures prints stay vibrant for many years to come
Epson INKdividual™ Cartridges for Maximum Value
* Replace only the cartridge that runs out
* Affordable INKdividual™ cartridges
* Reduce ink wastage and maximise savings
Excellent Print Speed to Boost Productivity
* Maximise time efficiency and productivity
* Achieve more in less time with excellent print speed of up to 26ppm
High Resolution for Superior Print Quality
Assured high quality printouts at up to 5760 dpi
Photo Perfection with Epson Creative Suite
* One-stop photo software solution
* Achieve photo lab quality prints in 3 simple steps with Epson Easy Photo Print
* Epson PhotoEnhance automatically adjusts images to give you amazing
true-to-life colour photos
The Secret Resetter Code for Canon BJC 3000 BJC 6000 BJC 6100 BJC 6200 S400 S450 F300 F600 F620 Canon BJC 7000 BJC 7100 BJC 8000 BJ F800 i6500
1. Power off printer
2. Hold Resume button then press and hold POWER, the beeper will sound once.
3. Hold POWER and release RESUME
4. Press RESUME twice
5. When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
6. Press Power to set data
The Secret Resetter Code for Canon BJC-600 BJC-600e BJC-610 BJC-620
1. Unplug Power Cord
2. Hold POWER and FF and Print Mode buttons
3. Plug in Power Cord
4. Release after the beeps
The Secret Resetter Code for Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70
1. Unplug Power Cord
2. Hold POWER and RESUME buttons
3. Plug in Power Cord
4. Release buttons after the printers starts up
5. Hold CARTRIDGE and RESUME
6. Press POWER
7. Release all buttons after the beeps
8. Press CARTRIDGE 16 times
9. Press RESUME
10. Unplug the Power cord
Epson Stylus C58 Color Inkjet Printer
Epson Stylus C58 Inkjet Printer Features
* On-demand Color Inkjet Printer
* Print speed
Black: 22 ppm (economy)
Color: 12 ppm (economy)
Photo: 85 seconds ( 4×6 / 10×5 - borderless)
* Max resolution (b&w) 5760 x 1440 dpi (with Variable-Sized Droplet Technology)
* Max resolution (color) 5760 x 1440 dpi (with Variable-Sized Droplet Technology)
* Paper Feed Method - Friction feed
* Paper Input capacity - 80 sheets, A4 Plain paper
* Max document size (print) - A4, A5, A6, B5, letter, half letter, legal, 4R, 5R, envelope, 132 x 220mm
* Black ink cartridge - Approx. 170 pages
* Color ink cartridge - Approx. 255 pages
* Interface - USB v2.0
* Input Data Buffer - 32 KB
* Compatible - Windows 98SE / ME / 2000 /XP/ XP, Mac OS 10.2+
* Dimensions - 435 (L) x 219 (D) x 165 mm (H)
* Weight - 2.8 kgs
C58 printer Blnking, would need Software Reset Blinking Printer EPSON Stylus C58 ... please downlod free. hopefully useful.
Download resetter Epson C58